Orthopedic penis enlargement devices have been used by men for more than a decade and have proven positive.The most widespread device is called an extender, which is translated from English as an expander or filler.This fully reflects the purpose.It is characterized by simplicity in design and assembly, which allows men to use both a purchased (factory) and homemade extender.It is quite easy to make.The most important thing is to have the necessary materials and basic knowledge of the mechanics of the intimate apparatus.
Types and effect of extenders
The device works according to the principle of dispersion of hollow bodies.This occurs under the condition of regular tension of the tissues due to periodic unwinding of the axes in the direction of increasing length.The growth of new tissue does not stop;cells divide under the constant influence of distraction force.
Average growth rates, according to reviews from users and the manufacturer, is an increase in length of 2-5 centimeters over a period of 6 to 10 months.Don't expect instant results.It requires patience and regular use of the extender.Violation of this recommendation will result in the desired effect not being achieved.
Depending on the method of attachment, extenders are divided into several types.When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum extender
The circumference is carried out using a special vacuum chamber.It covers the head of the penis with approximately 3-7 centimeters in circumference.It is considered the most reliable and secure.The risk of injury is practically reduced to zero as there is no risk of compression.
Extender for penis enlargement
Loop and strap extension
The fastening mechanics are almost the same, but the shape of the fastening is different.In the first case, a loop is used, and in the second, a strap is used.The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal.The loop, on the contrary, can strongly compress the head, disrupting the blood supply to the reproductive organ, but remains the most common option.
How to make an extension with your own hands at home?
You can make any of the three types of appliances mentioned above.The hardest thing to make will be the vacuum due to the fact that you will have to make a chamber.Otherwise, the process will not have any significant differences.
Drawings
Create a schematic diagram of the device yourself.To make a drawing, it is enough to study the design of any known manufacturer.Based on a photograph, drawing, video, they outline their sketch.The length of the side posts is chosen based on the desired result.It can vary from 20 to 25 centimeters.
Necessary materials and tools
A homemade extension at home is assembled from the same parts as the one from the factory.Specific materials depend on the type of structure being assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction.This places certain demands on the material.The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp corners.Its inner diameter should be 2-3 mm larger than the cross-sectional width of the penis.It is best to use a sterile bandage before use, which is changed each time.
- The slats (side bars) are chosen so that they can fix the required length for a long time.These can be dies, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed.If this condition is not met, such a homemade product will not work.
The difference between the units lies in the fastener.If you decide to make a variety with a camera, you should prefer not a plastic bottle, as written in some sources, but to buy a special jar.These are sold in pharmacies.This guarantees the creation of an internal vacuum.
Schematic homemade extender
Step-by-step assembly instructions
Making a strap or loop device involves performing the following work sequence:
- A piece with a diameter of 11 cm is cut out of a piece of plywood or other material not more than 10 mm thick.A hole with a circumference of at least 5.5 cm is made inside.Other dimensions are determined by the cross-section of the penis.
- The length of the rods is 20-30 cm.They are screwed all the way into the plywood and leave a bit on top.The entry points are filled with glue.
- They screw a "lamb" on each one.
- Strips are cut out of a thin sheet of metal and holes are made in them.
- A clamp made of soft tubing or a strap, which can be used as medically wide tourniquets, is inserted into the holes.
- Check the reliability of the fixation.
The assembly of the vacuum variety differs only in that a jar with a bulb is attached to the end.Not everyone has such a device at home, but it is freely sold in the city's pharmacies.The radius varies from 13 to 25 mm.It is selected according to the size of the reproductive organ.The tightness of the clamp is ensured by a rubber sleeve.Its length must be at least 6 cm.It can be made from elastic surgical gloves.
The air will be pumped out thanks to a bulb or a plug with a hose.You can use the tonometer element.The shut-off valve is unscrewed from it and inserted from the other end.This allows you to change the operating principle.The bulb will start to pump out instead of pumping air.As you can see, you will have to tinker more than with a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help, which clearly shows how the elements are connected, as well as what materials they are made of.
Extender for penis enlargement - tied below the knee
How and when should it be used?
The indication for using the device is the small size of the device (10-12 cm).This length is not a "reference" length.A man decides for himself whether he is satisfied with his reproductive organ or whether he wants more.To increase the size of the phallus, wear a home-made or factory-made device for at least 4-6 hours a day.The design allows you to hide the extender under clothing.People around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis.The ring must fit tightly against the pubic bone.
- The foreskin is pulled back and a camera, loop or strap is attached to the glans.It is necessary to make sure that the blood flow has not been disturbed (no excessive pressure, changes in the shade of the integument).
- Adjust the length of the rods.There should be no painful sensation.The parameter is gradually increased, which allows the organ to get used to the degree of tension, that is, the phallus is trained.
Whenever possible, massage the penis every hour.This allows him to quickly adapt to loads.After the allotted time, the device is removed and the meat is kneaded using special intimate creams.The unit is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the ability to try the stretcher without purchasing a device;
- relative cheapness;
- achieving a design that fully corresponds to the parameters of the phallus.
There are actually very few benefits.There are several disadvantages.These include the difficulty of the product, since it is quite difficult to independently assemble a model that will ideally twist, put on, take off and not press anywhere and not slip off.
Which extender is better - factory or homemade?
To answer this question, it is enough to compare the two types of models:
- A homemade product weighs much more than factory models.This leads to the need to adjust the rods every time for a long time so that they do not compress the head of the penis.Another point is that it is quite difficult to make a vacuum model.By the way, it is usually less effective than homemade with a loop and strap.
- Cost, which was mentioned as an advantage, is a relative advantage.Today there are Chinese models that cost 1-3 thousand rubles.This is no more expensive than a homemade extender.No one will sell half a meter of hairpins or 20 centimeters of textolite.You will have to buy a lot more material that will sit idle.This makes it profitable to assemble the device with your own hands only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, since it will be inconvenient to use.You have to spend a lot of time getting on and off, and considering that self-massage is recommended periodically, it is also less effective.
A conclusion can be drawn - the factory unit is better.To try this method of penis enlargement, you can simply buy a cheap model
What risks can there be when using a homemade device?
Experts and experts do not recommend assembling an extender yourself without the relevant skills.If the device turns out to be "clumsy", presses, squeezes, causes discomfort, it is strongly recommended not to wear it.This can lead to unpleasant consequences.
Homemade extender
A well-assembled unit will not be inferior in efficiency to a factory.It will only be aesthetically unattractive.Otherwise, there will be no difference, but there is also a nuance here.Many users write that after prolonged use, hematomas, compressions and irritations form on the dermis.
This may be due to low quality materials.Finding medical silicone in a pharmacy is almost impossible.If one is sold, its properties leave much to be desired, and with prolonged contact, negative consequences begin to appear.